WICKS MISSION STATEMENT
At Wicks we are committed to
providing exceptional, fast and
friendly service. By supplying
and supporting a broad range
of products and materials,our
mission is to help you complete
your next project on schedule
and with quality parts and
Simple and reliable, this joint
jigger quickly and accurately
notches 4130, stainless
steel, or other tubing and
pipe up to 2" diameter. Its
design allows it to both
clamp the tubing in place
and feed the saw smoothly into the work. Its hardened
steel arbor accepts any bi-metal, high-speed
hole saw from 9/16" to 2" (not included) Back
plate can be anchored to bench top by clamps,
bolts or vice and features an engraved graduated
protractor for notches up to 60 degrees. Requires
a 1/2" chuck hand drill. Industrial quality steel
Designed for use in tight
quarters where other cutters
won't fit. Requires only 1-
1/4" swing radius. Perfect for
instrument panels, control
cabinets, refrigeration units,
cold boxes, freezers, air conditioning,
heating units, machine
tools, etc. Satin finish. Cuts 1/8 to 5/8" (4-15mm)
O.D. tubing. (1/8 to 1/2" nom.) Size 1-11/16 x 1-
5/16 x 7/8". Wt. 2-1/2 oz.
(5) For hard or soft copper,
thin wall steel, stainless
steel, monel, titanium
and other tubing.
Makes clean, right angle
cuts with no burrs or chips to clog tubing.
Roller type with flare cutoff groove, fold away
reamer and spare cutting wheel. Rugged aluminum
alloy body designed for handling ease. Has
satin finish nickel-chrome plated body, polished
handle. 1/4" to 1-5/8" od soft tubing 7-41mm, 1/8"
to 1-1/2" od hard tubing. Length 4-15/16", weight
6-1/2 oz. Order replacement wheel - 75015.
Bends metal to any shape
and degree of angle using
dies for 1/2", 3/4", 1", 1-1/4"
and 1-1/2" diameter bends
by mounting in vice. Ideal
for making bends in materials
up to 3/8" round and
square (1/2" wide flat) Base: 1" x 3" x 3" - Handle
7/8" x 12" long. Dies included.
JUMBO ROD BENDER-constructed
of 4" x 6" aluminum
base 1" thick with a 16"
handle 7/8" diameter, bends
solid round, square and flat
iron, works on solid materials of up to 3/8" round
and square (1/2" wide flat),coils and bends wire of
many sizes, bends metal to any shape and degree
of angle, makes bends with q radius of 3/8", 3/4",
2", 3" and 4",installs on any vise, ideal for
hobbyists, prototype shops and do-it-yourselfers, 1
year replacement warranty on manufactures defects.
(2) For bending soft copper, aluminum,
brass, steel, stainless
steel and other metals.
Innovative multi-tube size
design does the work of
three conventional lever-type benders. Calibrated
markings for making accurate left hand,
right-hand, and offset bends. 90 degree start
requires less effort - makes bending fast and
easy. Wide, fixed hook simplifies operation,
holds tubing securely. Open side - slips on
tubing at any point. Attractive black and
chrome finish. Wt. 5 oz.
(5) Creates a properly positioned
and perfectly radiused bead
on 3003 aluminum tubing.
Allows flexible tubing or rubber
hose to be clamped onto
rigid 3003 aluminum tubing. For
wall thicknesses of .035 to .065.
(8) A simple & easy-to-use tool
for transferring the exact
cutting profile necessary to
accurately notch and weld
together tubing, tubing &
sheet, and tubing & angle.
Just slip the proper size tool
over the corresponding size
of tubing, push down the
pins to establish the tubing
joint profile, transfer the joint outline onto the tubing,
and cut. Housing made of rugged ABS with
6063 aluminum inner shell and spring temper SS
Budget priced tools for hand
bending soft tubing to any
shape without collapsing
walls. Special spring steel,
nickel finished. End belled
for quick tube removal.
Bends the following O.D.
tubing: 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 7/8, 3/4. Wt: 1
lb. 14 oz.
This Parker beading tool allows aircraft builders and restorers to create a bead or bulge on the outside of aluminum, copper, brass and mild steel tubes ranging from L" to 1" diameter. The beading tool is inserted into the tube and then dialed for expansion, pressing against the inside of the tube which results in a mar-free bead or ridge on the outside of the tube. Hoses can then be slid over the bead and clamped in place assuring absolute security against backing off the end of the tube. This works well in securing plastic fuel lines in all aircraft. The tools meet military standards. The Parker Beading Tool has been the number one choice of mechanics for making clamping beads in metal tubes. And to this day, no other tool even comes ...
Center It enables drilling pipe and other round objects. The V-block bolts to the drill press table and enables the drilling of round pieces parallel and centered. 7/16" groove with 118 degree angle lets you bottom drill bit to center v-block and bolt in place. V-block is 5" long X 4" wide X 1-3/4" high. The V-block lets you drill any sizes of pipe and wood dowels for many more perfect projects. The grooves on the outer sides eliminates slipage while holding pipes on tables, etc., for sawing pipe on job sites or other applications.