WICKS MISSION STATEMENT
  At Wicks we are committed to
  providing exceptional, fast and
  friendly service. By supplying
  and supporting a broad range
  of products and materials,our
  mission is to help you complete
  your next project on schedule
  and with quality parts and
  materials.
Registered UsersSign In
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Aircraft Wheels & Brakes > Tailwheels  
 

Tailwheels


Click on a Product to view details.

3 1/2" Non-Pneumatic Tailwheel

3 1/2" Non-Pneumatic Tailwheel


3.5" NON-PNEUMATIC TAILWHEEL No grease zerk, 1-1/2" wide, bore 3/8". Weight .839 lbs. Rated for up to 200 lbs.
4" Tailwheel

4" Tailwheel

(3)
Tailwheels do not have grease zerks. Used on Dragonfly. Rated 225 lbs.
5" Tailwheel

5" Tailwheel


5" NON-PNEUMATIC TAILWHEEL 1-11/16 wide, 5/8" bore, weight 1.355. Rated for up to 270 lbs.
Tailwheel Assembly TWSA-SFSA Series

Tailwheel Assembly TWSA-SFSA Series

(2)
TWSA-SFSA SERIES ASSEMBLY 6.50 x 2.5 solid tire, constructed of material same as SFS-P8A unit. Steerable with full swiveling unit, beyond full rudder range. New improved single arm shimmy- free fork. Assemblies to fit two different leaf spring sizes. Maule SFSA unit. The weight of the assembly is 6 LBS 10 OZ (Note: Add 7 OZ to total weight for connector springs). Please note the following Maule Tailwheel load limit parameters of Maule Tailwheels: 1321 LBS maximum load on tailwheel w/o tire and 531 LBS side load on tailwheel. Tailwheel last certified in 1991 @ 2500 LBS gross.
Ful Swivel Tailwheel

Full Swivel Tailwheel


Locks in steerable mode when aircraft is moved forward. Releases to full swivel when pushed sideways or backwards, or when maneuvering on the ground using brakes. Removable shim allows use with either 1-1/4" or 1-1/2" flat springs.
Matco Tailwheel

Matco Tailwheel


MATCO mfg produces an superior six inch tail wheel for use with tail dragger aircraft which require a light weight tail wheel--the T-6P. The T-6P tail wheel has a six inch pneumatic tire and an overall length of 10.00 inches. Maximum width of this tail wheel with fully splayed arms is 9.29 inches and overall height is 9.71 inches. This composite tail wheel weighs 4.75 pounds. All assembly bushings are made of oil impregnated brass so only routine lubrication is needed during the life of the tail wheel. The ball bearings in the wheel assembly are sealed and do not require lubrication either. In addition, the vertical axle has been redesigned to .625 for added strength and durability. The T-6P has a 3.5 inch aluminum wheel that uses a 6 inch ...
Matco Tailwheel Assembly

Matco Tailwheel Assembly


MATCO TAILWHEEL WHLT- 6 Fits 1-1/4" or 1-1/2" spring size. Full swivel locking. 6" solid rubber tire. Weighs 4.7 lbs. Rated up to 450 lbs.
6" Non-Pneumatic Tailwheel

6" Non-Pneumatic Tailwheel

(2)
6" NON-PNEUMATIC TAILWHEEL 2.250" wide, bore 5/8". Weight 2.754 lbs. Rated up to 460 lbs.
T8 Pneumatic Tailwheel Assembly

T8" Pneumatic Tailwheel Assembly


MATCO TAILWHEEL 8" Fits 1-1/4 or 1-1/2" full swivel locking. 8" pneumatic weighs 7.0 lbs.
8" Maule Tire/Wheel Assembly

8" Maule Tire/Wheel Assembly


8 PNEUMATIC TAILWHEEL 1/2" bore. Weight 3.70 lbs. Includes tire 2.80 x 2.50 x 4 ply and tube. As in Maule kits TWS1-4P8A, TWS1- 2P8A, TWS3-4P8A tailwheels.
Tailwheel Assembly TWSA-SFS-P8A Series

Tailwheel Assembly TWSA-SFS-P8A Series

(5)
TWSA-SFS-P8A SERIES ASSEMBLY Equipped with shimmy-free fork and 2.80X2.50-4 tire and tube. Fully steerable beyond full rudder range. All working parts are highly heat treated assemblies to fit two different leaf sizes. The weight of the assembly is 6 LBS 12 OZ (Note: Add 7 OZ to total weight for connector springs). Please note the folling Maule Tailwheel load limit parameters for Maule Tailwheels: 1321 LBS maximum load on tailwheel w/o tire and 531 LBS maximum side load on tailwheel. Tailwheel last certified in 1991 @ 2500 LBS gross.
blank_image

Spring Parts

(3)
ANTI-SHIMMY CONNECTOR SPRING KIT A high and low frequency spring is used to upset the natural frequency of the tailwheel. The lighter spring is used on the left side. Kit includes 2 - 5" chains and 4 links.
Tailwheel Spring Set

Tailwheel Spring Set

(2)
TAILWHEEL SPRINGS TENSION TYPE - lightweight spring kit consists of 2 each - tension springs,chain and connector links. Links fit either set. Heavier tension. TWS-2151 is 3/4" wide x 3- 1/2 spring length with 10" chain.
Image

Fork w/Axle

(3)