WICKS MISSION STATEMENT
At Wicks we are committed to
providing exceptional, fast and
friendly service. By supplying
and supporting a broad range
of products and materials,our
mission is to help you complete
your next project on schedule
and with quality parts and
materials.
(8)
Manual reset circuit breakers
used extensively as an
alternative to slow-blow
fuses in aircraft primary
electrical circuitry. Single
phase, non temperature compensated design features
light weight, miniature size, and high vibration
resistance. At 32F-Min ultimate trip: 110%;
Max ultimate trip: 150%. Maximum width 3/4".
Length behind panel is 1-3/8". Screw end terminals.
(11)
Push/Pull Circuit breakers
are single pole, thermal
devices. Unit may also
be used as a switch.
The breaker has a trip free
feature which allows
the contacts to open on an overload even with the
toggle or button held in the ON position. The W23
will carry 100% of rated load continuously but
must trip at 135% of rated load at 25° C. within
one hour. Amp rating in white on black button. Attaches
with 8-32 screws and washers. Approximate
size: 11/16 x 1-3/8 x 2-1/8 - 3/8" hole.
(12)
Thermal circuit breakers feature
recessed reset button which cannot
be manually pulled out to
disconnect the circuit. The
white button has a red band
around it for visible trip indication.
Mounting is with knurled
thumb nut on bushing. Wgt. less
than 1.5 oz. 50 VDC-250 VAC. Interruption
capacity is 2000 Amps at 40 VDC, 1000
amps at 350 VAC. Quick connect terminals. Amp
rating in red. Apx size: 11/16 x 1-3/8 x 1-7/8, 7/16"
hole.
(11)
Thermal circuit breakers feature recessed
reset button which cannot
be manually pulled out to
disconnect the circuit. The
white button has a red band
around it for visible trip indication.
Has 6-32 screw terminal
w/lock washer . Wgt.
less than 1.5 oz. 50 VDC-250
VAC. Interruption capacity is 2000
Amps at 40 VDC, 1000 amps at 350 VAC. Quick
connect terminals. Approximate size: 11/16" x 1-
3/8" x 1-3/4", 1/2" hole.
(11)
Feature plain toggle trip with rating
marked on end. Maximum operating
voltages are 50 VDC and
250 VAC (59 400Hx). Interrupt
capacity is 1000 amps at
125 VAC or 2000 amps at
40 VDC. 8-32 screw terminals
mounts with a single dress nut on a flattened
bushing. Wgt. less than 2 oz. 2" depth x 1-3/8"
height x 11/16" width, has 7/16"