WICKS MISSION STATEMENT
At Wicks we are committed to
providing exceptional, fast and
friendly service. By supplying
and supporting a broad range
of products and materials,our
mission is to help you complete
your next project on schedule
and with quality parts and
Total grip thickness is comprised
of the thickness of ALL
materials to be fastened. This
must include the thickness
of the material "P", to which
the stud assembly is attached;
the material "F", to which the
receptacle is attached plus allowance for paint or
other protective finishes. Note: If the grip thickness
is near the top of the stud grip range, the
next larger stud should be used. This will maintain
the positive locking action of the fastener under
vibration. To select the proper stud length, FIRST
select the grommet, next select the receptacle.
Once this is done, refer to the 4002 stud selection
Floating or rigid, use 1/8" rivets
to attach in either plain or
dimpled (D) holes. Rigid are
silicon bronze or stainless
steel, Floating have a steel plate and retainer.
For use with 2600, 2700, 4002 Series fasteners.
Provides full retraction of
stud assembly to allow
opening and closing of equipment without the possibility
of jamming or damage. Made of spring
steel and is Cad II plated. Use with Plus Flush
Grommets. Plain rivet hole diameter .128-.134.
Length from center hole to center rivet holes is 3"