WICKS MISSION STATEMENT
At Wicks we are committed to
providing exceptional, fast and
friendly service. By supplying
and supporting a broad range
of products and materials,our
mission is to help you complete
your next project on schedule
and with quality parts and
Mounts in 3-1/4" diameter
opening with tapered profile
and large tabs on lower
flange which makes it suitable
for higher airspeeds. For use in metal cowling
or plastic windshield, packed 1 pair per box.
For use in metal cowling or plastic
windshields, this snap vent
rotates to provide any degree
of ventilation. Retracts to
closed position nearly flush
with mounting surface.
Mounts in 3-1/4" diameter opening,
packed 1 pair per box.
Aluminum Eyeball Air Vent is
made from 6061 Aluminum
and anodized. These vents
are made to give long trouble
free service. The mounting
flange is 2.2" square with
mounting hole pattern of
1.70". The air flows through
a 1.2" hole allowing this vent
flow more than most small
Vent has knurled collar that
swivels 60 degrees to direct
air flow and volume. Manufactured
aluminum and anodized in
black or grey. 4 mounting holes
7/8" diameter spaced 2-3/8" apart with a mounting
plate thickness of 0.71". Total diameter of vent is
2-3/4". Made in the USA Can be attached with 2"
airduct flange ADF-2 (not included with vent).
Airline-style 3" metal swivel
vents are available in clear
or black anodized finish. Utilizes
a large opening which is
very effective in warmer climates. Designed
to directly replace the black plastic vents
that do not seal well when closed. Simple operation
by pushing and turning the knurled barrel
counter clockwise to open and clockwise to close.
Weighs 5.5oz. Dimensions: 3"square, 2-1/2"
mounting hole pattern. 1-7/8" opening, 30% larger
opening than black plastic vents Precisely CNC
machined, 6061-T6 aluminum. Seals well when
closed, which is important in cold climates.
Whisperflo ventilator has a
40 degree swivel with a
thumb operated closure control.
Made of ivory or black
plastic, it mounts in a 2-3/4"
diameter hole. It also provides maximum cooling
with the 1-5/8" diameter bore unit with little noise.
3" square with 4 hole mounting spaced 2-1/2".
Depth behind panel 5/8", total depth 1-11/16". Uses
All aluminum 90 degree air vent
adjusts airflow from full open
through closed by means of
a knurled ring. Mounts by
means of .090 x 2-3/8" aluminum
flange with 3 fastener
holes on 1-13/16" centers.
Depth behind flange: 1-7/16". Accepts 1-1/4"
aeroduct. Output 1-1/4" 3.5 ounces
Used on many low-wing aircraft
with side-window vents,
including Piper, Beechcraft,
and Mooney. By swinging
the Kool Scoop out the vent
opening, a comfortable airflow
is directed into the cockpit while
taxiing. Installs in minutes using double-
sided tape. Made of acrylic plastic. Size: 7" x
6" x 2". For ground use only.
2.5" inlet and 2.5" outlet. Inlet is
positioned 90 degrees to outlet,
versus straight through in all of
our other boxes. Mounting
plate, shaft, flapper and bushings
are all stainless steel. The
rest of box is anodized aluminum.
Furnished with silicone
gasket. Box is certified, is currently
being used on Cirrus aircraft.
Certs are available. 6.3 ounces
Originally made for the VE/LE. Tube
diameter 2" main body 3" x 3".
Riveted not welded. Also available
with stainless steel
mounting surface, flapper
and steel shaft for extra
heat protection (EC100-
This box is identical to the standard
cabin heat box, P/N
DL-001, except that the air
intake is parallel to the firewall
rather than coming
straight in from the heat
muff. This gives the builder
the option of running scat
tube parallel to the firewall. Furnished
with a flange gasket and four
mounting rivets. Can also be bolted to the firewall. 5.2 ounces
This box was developed for builders
who want a simple, light, all-stainless
box that will fit in tight
places, as it does not extend forward
of the firewall as far as a
standard box. Every part of the
tri-box is stainless; including
bushings, rivets, etc. It is furnished
with a closed-cell silicone gasket. 9.6 ounces
This "Y" tube is designed to be used with a cabin heat box to make warm air available to two or more locations in the aircraft. Constructed of seamless 6061-T4 tube. It weighs only 1.7 ounces. These tubes are expanded to a 2" ID on the inlet end, to slip over and clamp to the 2" OD tube of the cabin heat box, or even ganged. They are furnished with one stainless steel hose clamp.