WICKS MISSION STATEMENT
At Wicks we are committed to
providing exceptional, fast and
friendly service. By supplying
and supporting a broad range
of products and materials,our
mission is to help you complete
your next project on schedule
and with quality parts and
This tubing is suitable for
use in oil, air, vacuum, and
fuel applications. Also usable
as low pressure hydraulic
lines. Type T - off
white with a bursting pressure 1000 PSI. Also
used on brake lines with brass insert on 3/16"
with brass fittings. -65 to 150 degrees F. type T.
PARFLEX POLYETHYLENE TUBING Flexible,
low density polyethylene tubing.
Applications include pneumatic
lines, pitot lines, and
instrumentation. Use nylon
inserts with nylon fittings. 1/4" OD may also be
used with brass fittings. Working pressure: 120
psi. Minimum burst pressure: 480 psi. Operating
temperature: -80 ºF to +150 ºF.
Flexible polyurethane tubing
has greater abrasion and
tear resistance than any other
type of plastic tubing.
Won't age or oxidize. Excellent
- avoids brittleness down
to -100 degrees F. Tensile
strength 5900 PSI. Resists weathering, fuels,
oils, and many lubricants. Not to be used with Alcohol fuels
Using snapper clamps eliminates
distorted or crushed
hose and tubing due to unequal
or excessive clamping
force. Their ratcheting design
allows for fast, one-handed installation that will
not vibrate loose. Made of heat and uv stabilized
nylon, they are lightweight, reusable and corrosion
proof. Color: Black.
A semi-rigid, nylon tubing
offering good high temperature,
chemical and oil resistance.
High tensile strength
gives excellent coupling retention
under high pressure,
temperature and vibration
include instrumentation, fuel, and oil lines. For
use with either nylon or brass fittings. Working
pressure: 425 psi, Minimum burst pressure: 1700
psi. Operating temperature: -60F to +200F.
Wicks Aircraft and Motorsports | 410 Pine Street Highland, IL
62249 Orders: 1-800-221-9425 | Help Line: 618-654-7447 | Email Us Toll-Free Fax: 888-440-5727
Policy | Site