WICKS MISSION STATEMENT
  At Wicks we are committed to
  providing exceptional, fast and
  friendly service. By supplying
  and supporting a broad range
  of products and materials,our
  mission is to help you complete
  your next project on schedule
  and with quality parts and
  materials.
Registered UsersSign In
 
View CartView RFQ'sExpress Ordering  | Shipping 
 | Tax 
 | Terms 
 Shopping Cart  0 Items 
 Request for Quote  0 Items 
All Categories > Aircraft Kits 
 

Aircraft Kits

Click on a Product to view details.

Request Information
Acro Sport 1 Aircraft Kit

Acro Sport 1 Aircraft Kit

 (8)
If you dream of piloting your own personal high performance, fully aerobatic biplane, then the Acro Sport is for you. Designed by EAA Founder and President, Paul H. Poberezny, the single-place Acro Sport is based on sound aerodynamic engineering. Paul had the first time amateur aircraft builder in mind when he designed the Acro Sport. In fact, the Acro Sport is so straight forward and uncomplicated that it has been chosen by hundreds of EAA project School flight programs at high schools around the country. The Acro Sport features a wide landing gear, which provides excellent directional control and docile ground handling. In the air, the Acro Sport is fully aerobatic and suitable for both sportsman and ...

Easy Eagle Aircraft Kit

Easy Eagle Aircraft Kit

 (5)
Grosso Aircraft - Easy Eagle 1 Design lines out of the past with the performance of today. Featuring a fully welded steel frame combined with an all wood wing and a one piece aluminum landing gear, make it a airplane for today. Landing and taking off in this tail dragger is easy and fun. Ground handling is made easy with a fully controllable tail wheel.

Note: Materials subject to "Designer" Changes and Adjustments. Listing given to Wicks Aircraft upon Designers request. Prices subject to change without notice.


Acro Sport 2 Aircraft Kit

Acro Sport 2 Aircraft Kit

 (9)
If you want to share the joy of open cockpit aerobatics, then the Acro Sport II is the airplane that fits your needs. The larger, two-place Acro II can be constructed for just a fraction more than it's smaller, single place brother. The Acro II was designed by Paul Poberezny to be easy to build. You won't find complicated or hard to fabricate fittings on this elegantly simple aerobatic biplane. With it's larger wheels, wider landing gear, light weight and responsive controls, the Acro II is a sport plane which is both docile on the ground and nimble in the air. The airplane utilizes a variety of power plants in the 108 hp to 200 hp range. Capable of sportsman and intermediate aerobatics, the Acro II is a competitive ...

Bowers Flybaby Aircraft Kit

Bowers Flybaby Aircraft Kit

 (3)
The Fly Baby is a single-seat, open cockpit, folding wing monoplane powered by engines ranging from 65 to 100 HP. It was originally designed in 1960 to compete in the first (and so far, only EAA design competition). It is built primarily of wood, with fabric covering. Most are powered by Continental A-65, C-75, C-85, or O-200 engines. Performance is sprightly; a bit better than that of, say, an Aeronca Champ. The Fly Baby can be built as a biplane as well as a monoplane. The two monoplane wing panels are replaced by four smaller ones, plus a center section for the top wing. The aircraft can be switched back and forth between versions in about an hour, but it does take a helper. The biplane, while cool in concept, ...

Aerocanard Aircraft Kit

Aerocanard Aircraft Kit

 (24)
The AeroCanard is a 4 seat canard type aircraft with a Lycoming LIO360 engine. It has a 1000-mile range and typically cruises at over 200 mph on less than 10 gallons per hour. The AeroCanard SB has a smaller body width at the front seats. The plans include instructions for building either aircraft. There are literally thousands of canard aircraft similar to the AeroCanard flying all over world, and thousands more under construction. You can meet some of the people flying and building canards at the Canard Community Forum or at the many fly-in meetings held around the world. This highly efficient, fast, composite airplane can be built by one person in a garage or small workshop in as little as 18 months. All the training needed to master ...

Barracuda Aircraft Kit

Barracuda Aircraft Kit

 (8)
Build this superbly styled all-wood high performance award-winning aircraft capable of 200 MPH.

Bearhawk Aircraft Kit

Bearhawk Aircraft Kit

 (4)
The Bearhawk is a 4 place - plans built design with generous proportions and superior performance. The design parameters were for a heavy hauling BIG airplane with a good cruise speed and economical operation. The proto type Bearhawk N6890R is powered by a Lycoming 0-360 (170 hp) set up to burn auto fuel. To date the design has lived up to and exceeded expectations. Short field performance is excellent with the large flaps. See EAA Sport Aviation October 1995. for a flight review and technical evaluation. Construction: The Bearhawk has an all metal wing with a fabric covered steel tube fuselage and tail feathers. Cessna windshield and modified lift struts are the only airframe components that are not built by the homebuilder. The build ...

CX4 Thatcher Aircraft Kit

CX4 Thatcher Aircraft Kit

 (4)
Quote from David Thatcher Senior: "The aircraft is constructed with 6061T-6 aluminum and assembled on a 16' table with a 3"X¼" steel angle attached to the side used to make most of the bends in the metal. There are no special jigs required. The ribs and bulkheads are formed over wood. The engineering was calculated at 4 Gs and tested to 5.8 Gs. The airplane is quite simple and easy to make. The main center section and wing spars are made first and the wing attach points are drilled together to set the wing dihedral, the spars are separated and the wings constructed. The completed wings are joined to the center section spar and the center section is built up with the wings attached. Now you know that the wings will fit the airplane when ...

Flying Squirrel Aircraft Kit

Flying Squirrel Aircraft Kit

 (9)
The M-19 is designed as a rugged, simple STOL aircraft with docile flying manners. The key feature of this aircraft is it’s simple proven style at a remarkable low cost. The low cost is complemented by an easy to build strong construction method (composite). The build time is about 500 hours for a skilled fitter. However, anyone with a desire to do so can build this airplane. The valuable skills that you acquire will last you a lifetime.

Celerity Aircraft Kit

Celerity Aircraft Kit

 (18)
The Celerity is a high performance, 2-place side-by side plans built airplane with fully retractable landing gear, including the tail wheel. Constructed primarily of wood and fiberglass covering, the graceful Celerity cruises in the 200 mph range on 160hp and has a range of over 900 miles. Engines range from 150 to 180hp. The Celerity has a wingspan of 25ft and is 21ft, 10" in length.

Cougar Aircraft Kit

Cougar Aircraft Kit

 (9)
The Nesmith Cougar is a two place monoplane with a high wing. Continental engines of C75, C85 and C90 can be used. The fuselage is a welded steel tube fuselage, wood wings which are foldable. The aircraft is fabric covered.

Note: Materials subject to "Designer" Changes and Adjustments. Listing givent to Wicks Aircraft upon Designers request. Prices subject to change without notice.


J-3 Piper Cub Aircraft Kit

J-3 Piper Cub Aircraft Kit

 (24)
LMA's J-3 Piper Cub is a Full Size, Exact Scale Replica Fashioned in Wood. Very Fast Building, And Economical To Build, It Conforms To The New LSA Rules! This LMA Piper Cub LM-J3-W is an EXACT, Full Scale, Two Place Tandem REPLICA in Wood. It may be built to conform to the New LSA Rules, with a Rotax 65 HP 582 Engine or use up to and including a 65 HP Continental or equivalent. The Kit is a materials kit, but most of the metal parts are cut from Aluminum Extrusions, making fabrication very fast and inexpensive, with no welding (except for the Engine Mount). It is very easy to build even for the novice or first time builder. Building time can be as low as 12 to 16 months depending on many personal factors.

Note: Materials subject to ...


Honeybee Aircraft Kit

Honeybee Aircraft Kit

 (6)
The H-2 Honey Bee is a strut-and cable-braced aerobatic biplane with four, equalspan, 8-foot wing panels, designed to handle G-loads of +8 to -6. The prototype and early versions used engines in the 40-46 horsepower range, but the designer later moved up to an engine of 65 horsepower as standard. The plans provide a four aileron option for those who wish a more responsive roll rate. When that option is selected, together with an engine in the 85 horsepower range or better (such as the Hirth F-30), and with an inverted fuel system, the H-2A is suitable for use in competition aerobatics up to the International Aerobatic Club's "intermediate level." In 1992, an H-2A Honey Bee was named "Best" in the combined Ultralight/Lightplane ...

Fokker DR1 Aircraft Kit

Fokker DR1 Aircraft Kit

 (18)
Aircraft is metal, wood, tube and fabric; 125 - 200 HP; 1 seat; 1,406 lbs. gross weight and 949 lbs. empty weight.

Note: Materials subject to "Designer" Changes and Adjustments. Listing given to Wicks Aircraft upon Designers request. Prices subject to change without notice.


GP4 Aircraft Kit

GP4 Aircraft Kit

 (11)
The GP4 is the latest in a series of four aircraft designed by George Pereira. It is a high performance cross-country type aircraft designed to extract the most speed from the power available. Airfoil selection and drag reduction were primary considerations. The construction is of wood with foam and fiberglass utilized in the cowling and fairing areas. Design strength at full gross is 8G's positive and 6G's negative obtained by using a massive, one-piece main spar.

Note: Materials subject to "Designer" Changes and Adjustments. Listing given to Wicks Aircraft upon Designers request. Prices subject to change without notice.


Long Eze Aircraft Kit

Long Eze Aircraft Kit

 (19)
The LongEZE is specifically developed for efficient, high speed, long range traveling with room for two adults and plenty of baggage. The Longe-Easy is a small, high performance, high utility homebuilt sport plane. While recommended mainly for Day-VFR operation, competent pilots can also equip it for night and IFR flying. Power plant is either the 0-235 Lycoming or the 0-200 Continental. It has an alternator-powered electrical system and can be equipped with electric engine starter. It is very solid, stable airplant that has responsive ailerons, good turbulence response, excellent "hands-off" stability and safe stall characteristics. It can be maneuvered sharply, even to full aft stick, without fear of stall or spin. Using all the customer ...

Pober Junior Ace Aircraft Kit

Pober Junior Ace Aircraft Kit

 (13)
The Pober Junior Ace made its first flight with Captain Bud Judy at the controls. This first flight was successful and displayed the short field capabilities as well as low stall speed - ideal for small airstrips. The drawings for the airplane have full size wing rib drawings and two types of ailerons - the Friess aileron being a bit more responsive and lighter on aileron control. The indicated stall speed with one person on board is approximately 36 mpg. Indicated cruise with the Continental C-85-8 was a little over 80 mph. The Pober Junior Ace is open cockpit. The fuselage is chromoly steel tube, the tail group is chromoly steel tube and flat sheet stock to form ribs. The landing gear is chromoly tube with coil spring shocks. Wings are ...

Osprey Aircraft Kit

Osprey Aircraft Kit

 (33)
The Osprey is a two-place amphibian with retractable landing gear. Construction is all wood, being built much like a large model airplane. The wings just outboard of the main gear are removable for towing and home storage. Side by- side seating provides the hull width necessary for adequate flotation and efficient water performance. The sloping canopy was designed to allow a smooth airflow into the propeller and provide good visibility. The Osprey II was designed to be built, in its entirety, in a home workshop with no molds required other than the engine cowling. The Osprey was designed by George Pereira.

Note: Materials subject to "Designer" Changes and Adjustments. Listing givent to Wicks Aircraft upon Designers request. Prices ...


Pober Pixie Aircraft Kit

Pober Pixie Aircraft Kit

 (8)
The Pober Pixie is the answer to true light plane building and flying. The Pixie's style is very reminiscent of the open cockpit flying of the helmet and goggle 1930's. It is the result and influence that the late Ed Heath had on Paul Poberezny when Paul was a high school student with a desire to build and fly airplanes. The Pober Pixie is a truly economical light plane. Generally powered by 60 hp VW engines or Continental A-65's, fuel consumption is approximately 3 to 3.5 gallons per hour. Large wings and full span ailerons make the Pixie a joy to fly and provide it with great controllability at low air speeds. This flying fun machine is also easy to handle on the ground for anyone with minimum tail dragger experience. Pilots can be ...

Pober Super Ace Aircraft Kit

Pober Super Ace Aircraft Kit

 (14)
The Super Ace is constructed of basic materials, 4130 steel tubing for the fuselage, tail group, landing gear, fittings and wing struts. The wings are spruce spars and the wing ribs of spruce cap strips. The complete aircraft is covered with the PolyFiber covering materials. The wheels are 600x6 with hydraulic toe brakes. The control system is cable operated. The Proto type Super Ace is powered by a Continental C-85-8 engine of 85 hp. It does not have a starter or an electrical system. Power plants of up to 150 hp can be used; however, weight and balance considerations must be given to maintain the same engine and cowling lines and to keep the airplane's proportions. Wight has been added to the engine as it does not have a ...

Replica Primary Glider Aircraft Kit

Replica Primary Glider Aircraft Kit

 (5)
Single place glider is made of wood tubing and fabric; landing gear is fuselage skid. Estimated building time 200 man hours. Top speed 45 mph cruise 38 mph, Empty weight 175 lbs., Gross weight 375 lbs, Height 7.0 ft, length 17.67 ft, wing span 32.0, wing area 160.0.

Note: Materials subject to "Designer" Changes and Adjustments. Listing given to Wicks Aircraft upon Designers request. Prices subject to change without notice.


Skybolt Aircraft Kit

Skybolt Aircraft Kit

 (6)
A very versatile sport biplane, the Skybolt is a competitive aerobatic mount, yet has enough speed and load carrying ability to make it a practical cross country airplane. This 26 year old tried and proven design is thought by many to be the best looking of all the homebuilt biplanes. Designed for easy construction with hand tools, it can be built by first time builders. A true 2 place design, two 225 lb. adults plus baggage can easily be handled. Take offs and landings are simple and do require the skill level required for the smaller biplanes. Control pressures are light and well harmonized. A professional stress analysis was part of the development program. Hundreds are flying in the US and around the world. Professionally drawn plans ...

Sonex Aircraft Kit

Sonex Aircraft Kit

 (9)
Sonex is a basic and economical all metal two place monoplane. Designed to meet the needs of the European and Domestic sport aircraft markets, it can incorporate various light weight contemporary engines of 80 to 120 hp (engine package weight of less than 200 lbs.), and is perfectly suited to the new US Sport Pilot/LSA regulations. The three recommended power plants include the 2180cc Volkswagen, 2200 Jabiru, and 3300 Jabiru. Outstanding performance is achieved through its clean aerodynamic shape and simple, light weight construction. The Sonex Plans contain many options, including a tailwheel or tricycle landing gear along with a center or dual stick. Motor Mount drawings are supplied for all three recommended power ...

Waiex Aircraft Kit

Waiex Aircraft Kit

 (5)
The Waiex offers the same great performance and flight characteristics of the Sonex but with a sporty Y tail. Simple construction is from a lasercut kit with preformed ribs and pre-welded components using a minimum of tools. SPECIFICATIONS: Length 18' 1" , Wing Span 22', Wing Area 98.0 sq. ft., Tail Configuration Y, Air Foil 64-415, Primary Structure 6061 aluminum, Cockpit Width 40 in., Fuel capacity 16 Us Gal., Stall Speed (full flaps), 40 mph [64 km/h], Stall Speed (clean) 46 mph, Max Flap Extended Speed (Vfe) 100 mph [161 km/h], Maneuvering Speed 125 mph [201 km/h], Never Exceed Speed (Vne) 197 mph [317 km/h], Landing Gear Taildragger, (optional) Tri-gear, Controls Dual Control sticks, PERFORMANCE: Engine 80 hp 120 hp, Empty Weight ...

Xenos Aircraft Kit

Xenos Aircraft Kit

The XENOS follows in the Monnett tradition of bringing the cost of motor gliding to a highly affordable level. Using the same cost-effective and easy to- build construction techniques and materials of the Sonex and Waiex, the Xenos offers another Reality Check for the soaring world. The Xenos comes standard with utility wing tips that can be easily removed to fit inside a 40 foot hangar, and can be quickly interchanged with optional aerobatic wingtips. The Xenos can either be flown as a Sport Pilot/LSA, or it can be flown by pilots that hold a glider rating with a self-launch glider endorsement. The Xenos can be flown as a powered aircraft, a selflaunched glider that soars with the engine off, or it can motor-soar over great distances with ...

onex

ONEX Aircraft Kit

 (5)
Onex (pronounced “One-X”) is a single-seat aircraft designed to offer an even-more economical way to build and fly your sport pilot aircraft! The folding-wing design can fit into a garage, or share a T hangar with your flying buddies, be trailered on local roads, and the wing panels are easily removed for trailering at highway speeds. The Onex follows the Sonex Aircraft design and engineering tradition in offering a simple, robust, aerobatic aircraft capable of squeezing incredible performance out of lower powered engines.

LMA Taylorcraft Replica Aircraft Kit

LMA Taylorcraft Replica Aircraft Kit

 (25)
LMA's Taylorcraft is a Full Size, Exact Scale Replica Fashioned in Wood. Very Fast Building, And Economical To Build, It Conforms To The New LSA Rules! This LMA Taylorcraft LM-TC-W is an EXACT, Full Scale, Two Place Side by Side REPLICA in Wood. It may be built to conform to the New LSA Rules, with a Rotax 65 HP 582 Engine up to and including a 90 HP Continental or equivalent. The Kit is a materials kit, but most of the metal parts are cut from Aluminum Extrusions, making fabrication very fast and inexpensive, with no welding (except for the Engine Mount). It is very easy to build even for the novice or first time builder. Building time can be as low as 12 to 16 months depending on many personal factors. Exclusions are listed on the Kit ...

LMA Super Cub Replica Aircraft Kit

LMA Super Cub Replica Aircraft Kit

 (24)
LMA’s Super Cub Is A Full Size, Exact Scale Replica Fashioned In Wood. Very Fast Building, And Economical To Build, It Conforms To The New LSA Rules ! This LMA Super Cub LM-5X-W is an EXACT, Full Scale, Two Place Tandem REPLICA in Wood. It may be built to conform to the New LSA Rules, with a Rotax 65 HP 582 Engine up to and including a 90 Continental or equivalent. The Kit is a materials kit, but most of the metal parts are cut from Aluminum Extrusions, making fabrication very fast and inexpensive, with no welding (except for the Engine Mount). It is very easy to build even for the novice or first time builder. Building time can be as low as 12 to 16 months depending on many personal factors. Exclusions are ...

KR1 & KR2 Aircraft Kit

KR1 & KR2 Aircraft Kit

 (21)
KR-1 is a single place; the KR-2 is a two-place side by- side. Components may be purchased individually or in kit packages. Options are available to builders who wish to upgrade certain systems such as the hydraulic brake option; or choose alternative systems such as fixed landing gear option. In general the upper fuselage profile shown is based on premolded cowl, forward deck, canopy frame and turtle deck. Outboard wing sections are removable for tailoring.

Note: Materials subject to "Designer" Changes and Adjustments. Listing givent to Wicks Aircraft upon Designers request. Prices subject to change without notice.


Micro Mong Aircraft Kit

Micro Mong Aircraft Kit

 (3)
mitchell b-10

Mitchell B-10

 (7)